This time we chose the Gekkos, which we printed as part of our appearance at the Molding Expo, as our “Print of the Week”. The Gekkos were made with the HAGE3D 84L out of TitanX (ABS) with a layer thickness of 0.2 mm and a nozzle diameter of 0.4 mm. The total printing time of Gekkos was about five hours. The size of one gekko is: L: 140 mm, W: 90 mm, H: 30 mm.

HAGE3D print of the week week 22 gekkos titanx 3d printed